Maine Radon & Environmental Before & After Photos

Maine Radon and Water Treatment was called to a facility in New Gloucester, ME 04260 to install a radon mitigation system that would help ensure a safer environment for its occupants. After reviewing the site, our team identified a dirt floor in the furnace room that required sealing and redirected the installation location due to obstructions from a nearby tree. The system was plumbed into an existing sump area, and we added an economy sump lid for better sealing. With sub-slab depressurization and a radon membrane in place, the team completed the job using Schedule 40 piping and a 10-foot extension to properly vent radon gases away from the structure. Now that the system is up and running, the space is better protected against radon exposure. If you're looking to take the next step in creating a healthier indoor space, Maine Radon and Water Treatment is here to help.

In New Gloucester, ME, a homeowner reached out to Maine Radon and Water Treatment after a home inspection revealed high radon levels. Wanting a trusted team to handle the issue, they chose MR for their expertise and reliable service. Our crew installed a GX4 fan system, placing the suction point beneath the stairs, routing the pipe up the back of the garage, and connecting it to a nearby outlet for seamless operation. With the system running and a test kit in place, the home is now better protected against radon exposure. If you’re ready to take the next step in safeguarding your home, MR is here to help with professional radon mitigation solutions.

Cleaned up a mess from the previous contractor and added water right softner 20� sediment filter and whole house arsenic treatment.

Clean radon air installation for a client in South Portland. We use a laser to ensure our installations are perfect every time!

Maine Radon & Environmental was contacted to provide radon remeadation services for this South Portland Maine home. The current clients had tested there radon gas levels which were around 26 pci/l No problem for MRE. We were able to lower results down to 1 pci/l. Another happy client.