Maine Radon & Environmental Before & After Photos

Installing the Airwell required some careful planning and hard work. The existing drilled well extended 200 feet below ground, with only about three feet of casing above grade to work with. We first had to prepare the well by cleaning and securing the casing so the Airwell components could be lowered safely into place. Precision was key to ensure the system seated properly all the way down to depth without damaging the well or equipment.

Once in position, we connected the Airwell to the system and adjusted it to create the right airflow for consistent radon mitigation. The installation took patience and coordination, given the depth of the well and the limited working space above ground, but everything came together smoothly. By the end, the Airwell was operating as designed, providing effective mitigation and tying seamlessly into the rest of the filtration system.

Sub membrane radon mitigation job using clean space encapsulation. This will create negative pressure under the clean space which will help reduce radon air levels. This install is topped off with a premium fan cover and sani dri dehumidifier.

Client had excessive moisture in basement. Problem solved. Sump install and sani dri capped off with cleanspace enclapsulation

Complete water filtration job. The installation had elevated levels of radon in the water as well as hardness and copper issues. We were able to install a whole house bubble-up system along with a water softener and neutralizer

Some basements are challenging when trying to create a true encapsulation. This fieldstone foundation was very rough. Problem solved Using spray foam for wall curtains created the proper seal needed.