Click on a photo to enlarge.
In a calm place called Steep Falls in Maine, a careful homeowner talked to us about too much radon in their house. We checked and found out the radon levels were higher than normal. So, we got to work quickly and put a special radon air system to keep the air safe. This helped the whole family feel secure and happy. At Maine Radon & Water Treatment, we're on a mission to make homes safer and lives better through our radon-fixing skills.
When a homeowner in Steep Falls, Maine, discovered alarmingly high radon levels of 20.4 pCi/L after using a detection kit, they realized the urgent need to safeguard their family's health. Understanding the severe risks associated with prolonged radon exposure, they sought out the best solution and chose Maine Radon for our proven expertise and commitment to customer care. We quickly responded with a thorough on-site assessment, providing a detailed estimate and walking them through the entire mitigation process. Our skilled team then installed a highly effective radon mitigation system, which successfully brought the radon levels down to a safe 0.9 pCi/L. Throughout the process, we kept the homeowner informed and reassured, ensuring they felt confident in the safety of their home. If you’re concerned about radon in your home, don’t hesitate to reach out to Maine Radon for a free, no-obligation quote today—your family’s safety is our top priority.
In Steep Falls, ME, a homeowner decided to take proactive steps to reduce radon levels after testing revealed elevated readings. They chose Maine Radon and Water Treatment for their reputation for delivering reliable, straightforward installations and trusted expertise. After reviewing venting location options with the client, the team installed an RN2 fan system with a clean setup through sandy soil and ensured proper airflow was visible on the manometer at 1.9. With the system now in place, the home is better protected. If you’re thinking about reducing radon risks in your home, Maine Radon and Water Treatment can help make the process simple and effective.
This new construction house tested at 180 pcil. Getting results as low as possible we determined an additional extraction point and some serious seal cracking was needed. Results came in after at 0.4. Client was very happy.
This install was a challenge. Customer wanted unit in corner near heat pump condenser. With little room to spare we were able to fit in in there. We then we're able to run the pipe up the white trim to match the trim.
our service area